Samsung S7562 flashing done with odin setup working 10000%
10 July, 2016
Add Comment
Encrypting your link and protect the link from viruses, malware, thief, etc! Made your link safe to visit. Just Wait...
Samsung S7562 flashing done with odin setup working
 |
| Samsung S7562 flashing done |
Firmware Flashing Steps:
- Turn your phone off and remove Sim and Memory Card from it.- Run Odin program and check the following options:Auto Reboot - F.Reset Time- From the Extracted Firmware package you have to select files in the following
order to use in Odin program:
Bootloader: BOATLOADER_S7562xxxxxx_...REV02_user_low_noship.ta r.md5PDA: CODE_S7562xxxxxx_...REV02_user_low_noship.tar.md5PHONE: MODEM_S7562xxxxxx_...REV02_user_low_noship.tar.md5CSC: CSC_Oxx_S7562xxxxxx_...REV02_user_low_noship.tar.m d5
- Now put the phone into Download Mode: Press Volume Down key + Home Key +
Power Key.
- After you see the Warning message press Volume Up Key to enter Download
Mode.
- Connect the phone to your PC via USB cable.
- If your PC starts installing drivers then wait till it is finished.
- Look at Odin's window and make sure it detects the Com port that your phone
takes:
If the phone's drivers is installed correctly you will see 0:[COMxx] when xx is the
com port number so everything is OK.
- Click Start button to let Odin downloads the selected firmware files into your
phone.
- During the update process it is very risky to stop the program or remove USB
cable from phone so let it done without any interruption.
- When the update process is done the phone will be rebooted.
- If you see PASS! word at Odin's window then the update was successful.
- Disconnect your phone and wait till it is fully on.
- It is better to do Full Reset by this Code: *2767*3855# and let the phone rebooted
password is- grafix
Link will be apear in 15 seconds.
Well done! you have successfully gained access to Decrypted Link.
0 Response to "Samsung S7562 flashing done with odin setup working 10000%"
Post a Comment